はじめに

If the LCD display of your phone is broken, in this manual we will show you, how to disassemble the phone and how to change it.


Please SUBSCRIBE to my channel ツ

ビデオの概要

Switch-off the phone and remove the battery. Switch-off the phone and remove the battery. Switch-off the phone and remove the battery.
  • Switch-off the phone and remove the battery.

コメントを追加する

The small bottom bezel is held by 2x locking clips. Preferably use plastic tools for disassembling. Preferably use plastic tools for disassembling.
  • The small bottom bezel is held by 2x locking clips.

  • Preferably use plastic tools for disassembling.

コメントを追加する

There are 4x silver screws and 3x black screws. The rear cover is held by 5x locking clips. Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.
  • There are 4x silver screws and 3x black screws.

  • The rear cover is held by 5x locking clips.

  • Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.

コメントを追加する

Remove the back cover. With a plastic tool disconnect one by one: LCD Display flex cable
  • Remove the back cover.

  • With a plastic tool disconnect one by one:

    • LCD Display flex cable

    • Touchscreen flex cable

    • Menu Buttons Board flex cable

    • Coaxial Wire Antenna cable

Does the xperia e c1504 dual touch digitizer suits for xperia e c1504 single sim

Ratheesh V.T - 返信

Carefully remove the main board. Carefully remove the main board.
  • Carefully remove the main board.

コメントを追加する

Disconnect the other side of the flex cable and remove the Home Buttons board. Unstick the camera button. Unstick the camera button.
  • Disconnect the other side of the flex cable and remove the Home Buttons board.

  • Unstick the camera button.

コメントを追加する

The touch screen is stuck to the frame with double side adhesive tape. By using plastic tools gently start separating. At the bottom is glued on firmly because the bonded surface is larger.
  • The touch screen is stuck to the frame with double side adhesive tape.

  • By using plastic tools gently start separating.

  • At the bottom is glued on firmly because the bonded surface is larger.

  • Use a hot air to make separating more easy and safety.

コメントを追加する

With a plastic tool, carefully separate the LCD display from the touch screen. Clear the LCD Display from the old adhesive tape. Clear the LCD Display from the old adhesive tape.
  • With a plastic tool, carefully separate the LCD display from the touch screen.

  • Clear the LCD Display from the old adhesive tape.

コメントを追加する

Install the new LCD into the frame and put adhesive tape. Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen. Install the Touchscreen.
  • Install the new LCD into the frame and put adhesive tape. Be careful not to cover the holes (for the speaker, menu buttons etc.).

  • Install the Touchscreen.

コメントを追加する

To reassemble your device, follow these instructions in reverse order.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ZFix

メンバー登録日: 2013年12月09日

153,013 ポイント

430のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

277 メンバー

724のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 3

過去 7 日: 25

過去 30 日: 93

今までの合計 10,206