Sony Vaio VGN-Z48GD SSDs Replacement

はじめに

This is a guide to replace the SSD for a Sony Vaio VGN-Z48GD. This repair might be needed if you wish to upgrade your SSD, swap SSD with a another SSD, or when the SSD does not function properly. This repair would resolve the problems of storage to low or when the SSD does not store data anymore. There is no prior knowledge needed and there is nothing unusual about this repair.

必要な工具と部品

手順1 SSDs

Sony Vaio VGN-Z48GD SSDs Replacement, SSDs: 手順 1、 1の画像 1

Power off your laptop before starting.
Disconnect all external cables from the device.

編集

手順2

Flip the device over so that the battery is facing away from you.
Unlock the battery by using your finger to push the "Lock" latch to the right.
You will hear a soft click when the latch has been disengaged.

編集

手順3

Place your finger on the "Release" latch.
Slide the latch to the right and hold it.
Use your other hand to lift the battery from the groove.
Remove the battery.

編集

手順4

Remove a 5 mm Phillips #000 screw from the RAM cover located in the centre of the device.
Remove the RAM cover.
There is no need to remove the RAMs as they won't get in the way.

編集

手順5

Remove the following eleven screws:
Five 13 mm Phillips #000 screws
Six 5 mm Phillips #000 screws

編集

手順6

Flip the device and open the lid so that the keyboard is facing upwards.
Use an opening tool to lift the keyboard assembly slightly.
Make sure you don't lift the keyboard assembly too much as there is a ribbon cable in between.