メインコンテンツにスキップ

はじめに

If your device no longer takes a charge, replacing the battery may breathe new life into the tablet.

パーツ

パーツは指定されていません。

  1. Begin by opening the HDMI/USB port cover on the left edge.
    • Begin by opening the HDMI/USB port cover on the left edge.

    • Remove the three #000 headed, 3 mm long screws located underneath the port cover.

  2. Locate and open the Micro SD slot on the top side of the device.
    • Locate and open the Micro SD slot on the top side of the device.

    • Remove the two screws located beneath the cover.

  3. Attach the suction cup to the top right area of the screen. Pull to separate the screen from the rest of the device.
    • Attach the suction cup to the top right area of the screen.

    • Pull to separate the screen from the rest of the device.

    • Be aware of the front camera cable that is still connected to the rest of the device.

    • Detach the display ribbon cable.

  4. Disconnect the battery from the motherboard by pulling out the cable below the fan.
    • Disconnect the battery from the motherboard by pulling out the cable below the fan.

  5. Remove the seven 3 mm Phillips #000 screws that hold the battery in place.
    • Remove the seven 3 mm Phillips #000 screws that hold the battery in place.

    • Carefully remove the battery from the back assembly.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Alexander Bridges

メンバー登録日: 2015年09月16日

1,166 ポイント

7のガイドは作成済み

チーム

IUPUI, Team 1-2, Harley Fall 2015 IUPUI, Team 1-2, Harley Fall 2015人のメンバー

IUPUI-HARLEY-F15S1G2

4 メンバー

20のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 43

今までの合計 4,768