メインコンテンツにスキップ

はじめに

Replacing the disc drive is a relatively easy procedure, requiring only one screw to remove. The hardest part will be tracking down a replacement, which will likely be found in the secondhand market, like eBay.

パーツ

パーツは指定されていません。

  1. Unscrew the screw in the hole marked by three vertical dots, shown here.
    • Unscrew the screw in the hole marked by three vertical dots, shown here.

    • The screw is located on the bottom panel of the computer, next to the information panel with the production date.

  2. Pull out the 0.6 mm screw, or rotate the laptop and let it fall out.
    • Pull out the 0.6 mm screw, or rotate the laptop and let it fall out.

    • Be sure to not lose track of this screw, it holds the disc drive in place.

  3. Gently pull the edge of the disc drive until you feel it start to come out. Pull it all the way out, and set it aside.
    • Gently pull the edge of the disc drive until you feel it start to come out. Pull it all the way out, and set it aside.

まとめ

To reassemble your device, follow these instructions in reverse order.

Nick Sanchez

メンバー登録日: 2018年09月21日

97 ポイント

1ガイドが承認済み

チーム

University of North Texas, Team S2-G7, Riccardelli Fall 2018 University of North Texas, Team S2-G7, Riccardelli Fall 2018人のメンバー

UNT-RICCARDELLI-F18S2G7

5 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 5

今までの合計 87