はじめに

This is a detailed repair manual with visuals of how to properly replace the RAM modules in the Sony Vaio PCG-6J2L.

Hazards

Keep out of reach of children and pets.

DO NOT attempt to teardown or repair your device under the influence of drugs or alcohol.

DO NOT ingest any parts of the system.

Use the correct tools as stated in the tools section.

DO NOT touch any gold connectors on interior or exterior of the system.

Make sure system is unplugged before performing any maintenance on the system.

パーツ

パーツは必要ありません。

  1. Set the computer display-side down.
    • Set the computer display-side down.

    • Unlock the battery by sliding the port-side latch to the 'unlock' position.

    コメントを追加する

  2. On the opposite side of the battery, press the release latch and slide the battery away from the main body to remove.
    • On the opposite side of the battery, press the release latch and slide the battery away from the main body to remove.

    コメントを追加する

    • Unscrew the two memory panel screws and set the panel aside.

      • Ignore the removal of the heatsink panel. This does not need to be removed for RAM module access.

    コメントを追加する

    • Lift the film covering to reveal the memory module with the tweezers.

    • Pull the tabs on both sides of the RAM away from the module. The module will pop up.

    • Repeat this step for the other RAM module located directly above the memory module just removed.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Ryan

メンバー登録日: 2010年04月11日

152 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 25-89, Amido Spring 2010 Cal Poly, Team 25-89, Amido Spring 2010人のメンバー

CPSU-AMIDO-S10S25G89

4 メンバー

52のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 9

今までの合計 4,546