Sony Vaio PCG-4G1L Keyboard Replacement

はじめに

Common reasons for replacing the keyboard are: keys stuck or not registering, the keyboard is cracked, or the is keyboard grimy beyond cleaning.

In this guide, you will learn how to replace the keyboard for your device. Please remember to unplug the charging cable, since it could result in electric shock.

必要な工具と部品

手順1 Battery

Sony Vaio PCG-4G1L Keyboard Replacement, Battery: 手順 1、 1の画像 1

Turn off the computer and disconnect the charging cable.
Failing to unplug the cable can result in electric shock.

編集

手順2

Slide battery release toggle switch towards the "RELEASE" print.

編集

手順3

Sony Vaio PCG-4G1L Keyboard Replacement: 手順 3、 3の画像 3

Apply pressure with your thumb on the grip.
Pull the battery out while simultaneously holding the battery release toggle switch in the release position.

編集

手順4 Keyboard

Sony Vaio PCG-4G1L Keyboard Replacement, Keyboard: 手順 4、 2の画像 1

Sony Vaio PCG-4G1L Keyboard Replacement, Keyboard: 手順 4、 2の画像 2

Remove one 5 mm Phillips #1 pan head screw, in the middle of the laptop, using a Bit Driver with Phillips PH1 bit.

編集

手順5

Be sure to pry the plastic opening tool under the keyboard, rather than under the keys. Otherwise, some keys could get harmed.
While using a plastic opening tool, carefully lift the keyboard by inserting the tool under the edge.

編集

手順6

Sony Vaio PCG-4G1L Keyboard Replacement: 手順 6、 3の画像 3

Do not pull the keyboard too far away, as a ribbon cable is still attached. Failing to do so can cause damage to the ribbon cable or the connector.
Use the plastic opening tool to release the clamp.
Using slight pressure, remove the ribbon cable with your fingers.