メインコンテンツにスキップ

Sony VAIO VPCEC1M1E Keyboard Replacement

必要な工具と部品

  1. Sony VAIO VPCEC1M1E Keyboard Replacement, Keyboard: 手順 1、 1の画像 1
    • Remove the following color-coded screws:

    • These screws secure the RAM and hard drive covers, respectively.

    • These screws secure the optical drive to the lower case of the laptop.

    • The various other screws highlighted in the picture are unnecessary to remove and should be done at your own discretion.

  2. Sony VAIO VPCEC1M1E Keyboard Replacement: 手順 2、 1の画像 1
    • Remove the following screws:

    • Five screws highlighted in orange.

    • Two screws highlighted in blue.

    • Pry the hard drive connector upwards from its socket on the logic board.

  3. Sony VAIO VPCEC1M1E Keyboard Replacement: 手順 3、 1の画像 1
    • Release the highlighted clips to remove the upper case of the keyboard.

  4. Sony VAIO VPCEC1M1E Keyboard Replacement: 手順 4、 3の画像 1 Sony VAIO VPCEC1M1E Keyboard Replacement: 手順 4、 3の画像 2 Sony VAIO VPCEC1M1E Keyboard Replacement: 手順 4、 3の画像 3
    • Flip up the retaining flap (highlighted in red) on the keyboard ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap and not the socket itself.

    • Pull the keyboard ribbon cable straight out of its socket toward the front edge of the laptop.

ゴール

7 の人々がこのガイドを完成させました。

作成者

7人の作成者と共同で作成されました。

Stephan

メンバー登録日: 08/20/11

199 ポイント

1ガイドが承認済み

3 件のコメント

Very useful, thank you. A real pain to do though without snapping the plastic tabs on the upper case.

Eddie B - 返信

OMG... guys, you need just unscrew FOUR screws on the bottom (two orange circles on the same level that yellow sticker and two orange-circled screws in the middle of left and right side) and then pop the keyboard up with knife, etc, and disconnect the cable.

Paul G - 返信

agree with Paul G. you don’t need to remove all the plastic case to change the keyboard

Pierret -

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 12

今までの合計 22,980