メインコンテンツにスキップ

この翻訳は、ソースガイドの最新の更新を反映していない可能性があります。 翻訳の更新に協力してください。 または ソースガイドを参照してください

ソニーのパルスエリート版のバッテリー交換

必要な工具と部品

  1. ソニーのパルスエリート版のバッテリー交換: 手順 1、 1の画像 1
    • ヘッドバンド /イヤーピース接合部のL(左側)の表示を確認します。

    • バッテリーは左のイヤーピースにあります。

    • マザーボードは右のイヤーピースにあります。

  2. この手順は未翻訳です。 翻訳を手伝う。

    ソニーのパルスエリート版のバッテリー交換: 手順 2、 2の画像 1 ソニーのパルスエリート版のバッテリー交換: 手順 2、 2の画像 2
    • Gently pull around the perimeter of the left ear cushion until it comes off.

  3. この手順は未翻訳です。 翻訳を手伝う。

    ソニーのパルスエリート版のバッテリー交換: 手順 3、 2の画像 1 ソニーのパルスエリート版のバッテリー交換: 手順 3、 2の画像 2
    • Use the PH00 Screwdriver to remove the three Phillips 6mm screws around the perimeter of the ear cup.

    • Gently pull the outer ear rim off of the headset assembly.

    • Harsh removal may cause permanent damage to the speaker wires.

  4. この手順は未翻訳です。 翻訳を手伝う。

    ソニーのパルスエリート版のバッテリー交換: 手順 4、 1の画像 1
    • Using tweezers, gently pry the red and black speaker wires from the attached socket.

  5. この手順は未翻訳です。 翻訳を手伝う。

    ソニーのパルスエリート版のバッテリー交換, 電池交換: 手順 5、 2の画像 1 ソニーのパルスエリート版のバッテリー交換, 電池交換: 手順 5、 2の画像 2
    • Lift up battery and disconnect wires using tweezers.

    • Use a new battery for reconstruction.

終わりに

デバイスを再構成するには、以下の手順を逆の順序で実行してください。

8 の人々がこのガイドを完成させました。

以下の翻訳者の皆さんにお礼を申し上げます:

en jp

66%

アキ坊さんは世界中で修理する私たちを助けてくれています! あなたも貢献してみませんか?
翻訳を始める ›

作成者

2人の作成者と共同で作成されました。

Chris Echter

メンバー登録日: 01/29/15

865 ポイント

4のガイドは作成済み

チーム

Clemson, Team 14-2, Shirley Spring 2015 Clemson, Team 14-2, Shirley Spring 2015人のメンバー

CLEM-SHIRLEY-S15S14G2

5 メンバー

12のガイドは作成済み

7 件のコメント

Where can I buy the replacement battery for this?

Pretty hard to find...

francisklalumiere - 返信

Replacement batteries can be found by googling "SP70C battery". It is a Lithium battery with 900mAh and a 3.7v output. AliExpress shows them for $11 including shipping.

David McAndrews - 返信

Can I mod and replace the battery with a bigger one with no white connection, just positive and negative? Thanks!

marit - 返信

Thank you so much for this guide. I got a 1000mAh batter from Amazon for 10 dollars. It lasts way longer and was extremely easy to install. Very thankful for this. Thanks!

sharku19z - 返信

i just attempted... the connector to the battery just pulled off. NOTE: Pull up from PCB not out. The connector sets down into it.

Garrett Parmenter - 返信

コメントを追加

統計データ:

過去 24時間: 4

過去 7 日: 17

過去 30 日: 57

今までの合計 10,573