修理を始めるには コミュニティ ストア

Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement

はじめに

This guide will provide instruction for replacing the swivel plastic cover on the Sony Extra Bass headphones. This piece encases the swivel piece and can get damaged through wear and tear.

必要な工具と部品

  1. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement, Swivel: 手順 1、 1の画像 1

    • Begin by laying the headphones down flat with the speakers facing up.

    • Be sure to unplug the headphones from any other devices.

    編集

  2. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: 手順 2、 2の画像 1 Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: 手順 2、 2の画像 2

    • Next, take out the screws that hold the front plate, using a J00 screwdriver.

    • Repeat for both the left and right screws.

    • These screws are very small. It is helpful to have a spot prepared to put the screws to avoid losing pieces.

    編集

  3. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: 手順 3、 1の画像 1

    • Now that the screws have been removed, pull away the plastic casing that covers the swivel piece (directly above the speaker).

    編集

  5. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: 手順 4、 1の画像 1

    • Now that the swivel piece is exposed, use a J00 screwdriver to unscrew the center screw.

    • Repeat this process on both sides if necessary.

    • This center screw is the piece that retains the swivel action, unscrew completely and remove to replace.

    編集

  6. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement, Swivel Plastic Cover: 手順 5、 1の画像 1

    • With the swivel screw removed, remove the plastic casing.

    編集

  7. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: 手順 6、 1の画像 1

    • Using a little amount of force, slide the plastic cover off of the headband.

    編集

  8. Sony MDR-XB450AP Extra Bass Headphones Swivel Plastic Cover Replacement: 手順 7、 1の画像 1

    • Pull the plastic until the cover is fully removed.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

4人の作成者と共同で作成されました。

Terrance Gallaher

メンバー登録日: 01/18/17

870 ポイント

5のガイドは作成済み

バッジ: 12

+9 個以上のバッジ

チーム

Eastern Washington University, Team 2-7, Crane Winter 2017 Eastern Washington University, Team 2-7, Crane Winter 2017人のメンバー

EWU-CRANE-W17S2G7

2 メンバー

14のガイドは作成済み

コメント 1 件

Necesito la pieza, dónde la compro?

lucas2188 - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 3,221