メインコンテンツにスキップ

Sony ICF-C1T Speaker Replacement

必要な工具と部品

  1. Sony ICF-C1T Speaker Replacement, Speaker: 手順 1、 2の画像 1 Sony ICF-C1T Speaker Replacement, Speaker: 手順 1、 2の画像 2
    • Using a Phillips #00 screwdriver, remove the four 14mm screws from the underside of the device.

    • Be sure that the device is unplugged and the battery has been removed before tampering with the device.

  2. Sony ICF-C1T Speaker Replacement: 手順 2、 1の画像 1
    • Using the opening tool, gently pry the top portion from the side section of your device.

  3. Sony ICF-C1T Speaker Replacement: 手順 3、 2の画像 1 Sony ICF-C1T Speaker Replacement: 手順 3、 2の画像 2
    • Gently pull the top of the clock away from the rest of the device.

    • Be careful when tugging on this piece of the clock. The clock display is located directly inside the front face and is connected by multiple wires.

  4. Sony ICF-C1T Speaker Replacement: 手順 4、 2の画像 1 Sony ICF-C1T Speaker Replacement: 手順 4、 2の画像 2
    • Using the Phillips #00 screwdriver, remove the two 14mm screws from the top of the motherboard.

    • Be careful to avoid the sharp pieces on the motherboard when handling the device.

  5. Sony ICF-C1T Speaker Replacement: 手順 5、 3の画像 1 Sony ICF-C1T Speaker Replacement: 手順 5、 3の画像 2 Sony ICF-C1T Speaker Replacement: 手順 5、 3の画像 3
    • Remove the Phillips #00 screw from the bottom of the white and blue box.

    • Remove the Phillips #00 screw from behind the white and blue box.

    • After unscrewing the white box, gently pull it out. This will allow for more room to access the speaker.

  6. Sony ICF-C1T Speaker Replacement: 手順 6、 1の画像 1
    • To separate the motherboard completely, you can cut the red and black wires that are attached to the speaker. This will allow you to access the speaker fully.

    • Use caution when tampering with the wires and sharp parts of the device.

  7. Sony ICF-C1T Speaker Replacement: 手順 7、 2の画像 1 Sony ICF-C1T Speaker Replacement: 手順 7、 2の画像 2
    • Use the plastic opening tool and the spudger to separate the speaker from the device by tracing its outline and loosening the glue.

    • Do this step gently as to not damage the device or cause harm to yourself.

    • When reassembling the device, you will need to use glue to place the new speaker back in its place.

    • It would be wise to test the device after reconnecting wires, before screwing and gluing the parts back together.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

4人の作成者と共同で作成されました。

Megan

メンバー登録日: 01/30/15

275 ポイント

2のガイドは作成済み

チーム

University of Kentucky Louisville, Team 1-5, Rountree Winter 2015 University of Kentucky Louisville, Team 1-5, Rountree Winter 2015人のメンバー

LOUISVILLE-ROUNTREE-W15S1G5

3 メンバー

5のガイドは作成済み

コメント 1 件

can I connect aux out port to speaker?

Dong-Hwan Shin - 返信

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 11

過去 30 日: 19

今までの合計 2,623