はじめに

These instructions will guide you step-by-step to remove the door in order to get to the speakers inside

パーツ

パーツは必要ありません。

  1. Pull on tab away from the camera by applying pressure with index finger. Pull on tab away from the camera by applying pressure with index finger.
    • Pull on tab away from the camera by applying pressure with index finger.

  2. Next, remove the three 3 screws shown with the red markers.
    • Next, remove the three 3 screws shown with the red markers.

  3. Place the camera  on a flat service, so that the strap is downward and the lens is facing you. First, lift up the connector. Then pull it back.
    • Place the camera on a flat service, so that the strap is downward and the lens is facing you.

    • First, lift up the connector.

    • Then pull it back.

    • Remove the connector from the device.

  4. Position the camera so that the screen tab is pointing towards you. Twist the tab clockwise one notch.
    • Position the camera so that the screen tab is pointing towards you.

    • Twist the tab clockwise one notch.

    • Remove the single screw.

  5. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  6. Remove the two  screws on the control board.
    • Remove the two screws on the control board.

  7. Place the camera so that the lens is facing downward and the battery compartment is facing towards you. Remove the single screw.
    • Place the camera so that the lens is facing downward and the battery compartment is facing towards you.

    • Remove the single screw.

  8. Lay the device on its side so it is resting on the strap and the bottom of the camera is facing you.
    • Lay the device on its side so it is resting on the strap and the bottom of the camera is facing you.

    • Remove the five screws.

  9. Close the LCD screen door.
    • Close the LCD screen door.

    • Turn the camera to the eye piece and battery compartment is facing you.

  10. Pull the entire cabinet panel away from camera.
    • Pull the entire cabinet panel away from camera.

  11. You have disassembled the cabinet door and got to the speakers.
    • You have disassembled the cabinet door and got to the speakers.

    • Do not try to pry off the entire door, it can remain slightly attached.

まとめ

Your door will now be disassembled in order to replace parts inside and these steps in reverse order will also help you put the door back together

Amber Han

メンバー登録日: 2014年09月09日

107 ポイント

1ガイドが承認済み

チーム

CSU Fullerton, Team 2-5, Bruce Fall 2014 CSU Fullerton, Team 2-5, Bruce Fall 2014人のメンバー

CSUF-BRUCE-F14S2G5

4 メンバー

2のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 7

今までの合計 478