はじめに

This guide provides instruction for installing a motherboard for the Sony Ericsson TM506 cell phone.

Firmly hold the phone between your fingers with your thumb on the battery cover.
  • Firmly hold the phone between your fingers with your thumb on the battery cover.

  • Push down with your thumb until the battery cover comes off.

コメントを追加する

Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.
  • Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.

コメントを追加する

  • Remove the two rubber casings for the top two screws with a plastic opening tool.

コメントを追加する

  • Unscrew these two 5.4mm screws with a Torx T6 screwdriver.

コメントを追加する

  • There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.

コメントを追加する

  • The sound box is attached to the case by two snap hooks.

  • Lift the sound box up to remove it from the case.

コメントを追加する

  • Locate the 80-pin connector.

  • Carefully, lift up on the connector to separate it from the board.

コメントを追加する

  • There are two snap hooks that attach the motherboard to the case.

  • Using a plastic opening tool, carefully lift up on the motherboard to detach it.

  • The motherboard is extremely fragile. Try to be forceful yet delicate in the removal because it will not come off easily.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Daniel

メンバー登録日: 2012年06月20日

71 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 1-1, Regan SU 2012 Cal Poly, Team 1-1, Regan SU 2012人のメンバー

CPSU-REGAN-SU12S1G1

2 メンバー

16のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 984