はじめに

This guide will assist you in removing the vibration motor from your Sony Ericsson T68i.

Remove the battery from the back. Remove the battery from the back.
  • Remove the battery from the back.

コメントを追加する

Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips. Do not bend it too far down, or else you risk breaking the two bottom clips. Do not bend it too far down, or else you risk breaking the two bottom clips.
  • Pry off the plastic cover from the top with a thin plastic shim, then remove it from the two bottom clips.

  • Do not bend it too far down, or else you risk breaking the two bottom clips.

コメントを追加する

Unscrew all four Torx T6 screws. Keep in a safe place. Keep in a safe place.
  • Unscrew all four Torx T6 screws.

  • Keep in a safe place.

コメントを追加する

After removing the screws, the two halves will separate. If not, then pry them gently apart. After removing the screws, the two halves will separate. If not, then pry them gently apart. After removing the screws, the two halves will separate. If not, then pry them gently apart.
  • After removing the screws, the two halves will separate. If not, then pry them gently apart.

コメントを追加する

Remove the vibration motor visible in the front housing. Remove the vibration motor visible in the front housing.
  • Remove the vibration motor visible in the front housing.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Tim Dascomb

メンバー登録日: 2010年04月13日

123 ポイント

13のガイドは作成済み

チーム

Cal Poly, Team 26-34, Regan Spring 2010 Cal Poly, Team 26-34, Regan Spring 2010人のメンバー

CPSU-REGAN-S10S26G34

4 メンバー

13のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 2,359