メインコンテンツにスキップ

はじめに

Please note: you must remove the screws from the back casing before beginning this guide.

  1. Remove 4 screws from battery chamber
    • Remove 4 screws from battery chamber

    • Red - Phillips 0 screwdriver

    • Blue - Torx 6 screwdriver

  2. Gently pry off back casing
    • Gently pry off back casing

    • Note: work shim or flathead screwdriver around entire seam before attempting to pull off casing. This will reduce the chance of cracking the casing.

  3. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  4. Remove casing to expose camera components
    • Remove casing to expose camera components

  5. Gently pry open front casing by working a small shim or flathead screwdriver along the entire seam
    • Gently pry open front casing by working a small shim or flathead screwdriver along the entire seam

  6. Remove front casing by gently lifting it from the phone
    • Remove front casing by gently lifting it from the phone

    • Be careful not to pull off any other delicate pieces

  7. Keypad should be easy to remove Caution: LCD screen is very fragile. Be careful not to catch the keypad on it while removing.
    • Keypad should be easy to remove

    • Caution: LCD screen is very fragile. Be careful not to catch the keypad on it while removing.

まとめ

To reassemble your device, follow these instructions in reverse order.

Abby Evers

メンバー登録日: 2011年10月04日

196 ポイント

6のガイドは作成済み

チーム

UW Stout, Team 1-6, Zhou Fall 2011 UW Stout, Team 1-6, Zhou Fall 2011人のメンバー

UWSTOUT-ZHOU-F11S1G6

4 メンバー

12のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 3,010