メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Open the battery cover by sliding it towards you. Open the battery cover by sliding it towards you.
    • Open the battery cover by sliding it towards you.

  2. Push the purple latch with your thumb to unlock the battery.
    • Push the purple latch with your thumb to unlock the battery.

    • Pull the battery out.

  3. Remove the eight Phillips #000 screws. Remove the eight Phillips #000 screws. Remove the eight Phillips #000 screws.
    • Remove the eight Phillips #000 screws.

  4. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  5. Remove the single Phillips #000 screw found next to the battery latch.
    • Remove the single Phillips #000 screw found next to the battery latch.

  6. Remove the middle panel on the side of the device. Slowly pry the camera apart at its seem.
    • Remove the middle panel on the side of the device.

    • Slowly pry the camera apart at its seem.

  7. Lift the power button board up off of the daughterboard. Lift the power button board up off of the daughterboard. Lift the power button board up off of the daughterboard.
    • Lift the power button board up off of the daughterboard.

  8. Remove the single Phillips #000 screw.
    • Remove the single Phillips #000 screw.

    • Use your hands to remove the blue daughterboard.

  9. Flip the camera around. Remove the  black and orange ribbon cables.
    • Flip the camera around.

    • Remove the black and orange ribbon cables.

まとめ

To reassemble your device, follow these instructions in reverse order.

Alfred Bee

メンバー登録日: 2018年02月11日

532 ポイント

2のガイドは作成済み

チーム

University of North Texas, Team S1-G4, Thompson Spring 2018 University of North Texas, Team S1-G4, Thompson Spring 2018人のメンバー

UNT-THOMPSON-S18S1G4

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 52