メインコンテンツにスキップ

Sony Cyber-shot DSC-WX350 Motherboard Replacement

必要な工具と部品

  1. Sony Cyber-shot DSC-WX350 Motherboard Replacement, Motherboard: 手順 1、 3の画像 1 Sony Cyber-shot DSC-WX350 Motherboard Replacement, Motherboard: 手順 1、 3の画像 2 Sony Cyber-shot DSC-WX350 Motherboard Replacement, Motherboard: 手順 1、 3の画像 3
    • Remove 6 Phillips 4mm screws from the bottom and sides of the device.

    • Remove the 1 Phillips 4mm screw from under the battery cover.

  2. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 2、 1の画像 1
    • Insert the plastic opening tool between the back cover and the bottom plate. Gently pry the cover off.

  3. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 3、 2の画像 1 Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 3、 2の画像 2
    • Use your fingers to slide out the controller wheel board.

  4. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 4、 1の画像 1
    • On the left side of the camera, pull the LCD off the back plate.

    • There will be a ZIF connector by the control wheel, release the connector and remove the LCD.

  5. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 5、 2の画像 1 Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 5、 2の画像 2
    • Once the LCD is off use the J00 screwdriver to take out the two 4mm silver screws. Once the screws are taken out pull off the piece with your fingers.

  6. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 6、 1の画像 1
    • Remove the three ZIFs connected to the motherboard. The top is found under a piece of tape.

  7. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 7、 2の画像 1 Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 7、 2の画像 2
    • Remove the lens assembly and motherboard from the front of the case.

    • The lens assembly should separate when removing the front.

  8. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 8、 3の画像 1 Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 8、 3の画像 2 Sony Cyber-shot DSC-WX350 Motherboard Replacement: 手順 8、 3の画像 3
    • On the backside of the motherboard, a silver clip is holding the motherboard to the plastic shell. Insert the plastic opening tool under the clip and pry gently until it releases.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Ryan Speitel

メンバー登録日: 05/22/17

101 ポイント

1ガイドが承認済み

チーム

IUPUI, Team S1-G1, Wilson Summer 2017 IUPUI, Team S1-G1, Wilson Summer 2017人のメンバー

IUPUI-WILSON-SU17S1G1

4 メンバー

3のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 25

今までの合計 1,437