はじめに

This page will guide you through the removal of the front casing on the Sony Cyber-shot DSC W150.

パーツ

パーツは必要ありません。

The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.
  • The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.

コメントを追加する

Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.
  • Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.

コメントを追加する

On the right side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and LCD screen facing you.)
  • On the right side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and LCD screen facing you.)

コメントを追加する

On the left side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and the LCD screen facing you.)
  • On the left side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and the LCD screen facing you.)

コメントを追加する

Gently remove the back casing by holding onto both sides of the camera and pulling them apart.
  • Gently remove the back casing by holding onto both sides of the camera and pulling them apart.

コメントを追加する

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Now, carefully pull off the back cover.
  • Now, carefully pull off the back cover.

コメントを追加する

The two halves of the camera casing should now be separate.
  • The two halves of the camera casing should now be separate.

コメントを追加する

Keep track of the small screws that you remove.
  • Keep track of the small screws that you remove.

  • Opening, removing and/or replacing the front casing may void your manufacturers warranty

コメントを追加する

Remove the two screws at the top of the camera casing.
  • Remove the two screws at the top of the camera casing.

There was no screw in the left hand location shown, when disassembling my camera for the first time.

Chas - 返信

Gently pop open the plastic piece as shown.
  • Gently pop open the plastic piece as shown.

コメントを追加する

Remove the screw connecting the front casing to the electrical components as shown.
  • Remove the screw connecting the front casing to the electrical components as shown.

コメントを追加する

Gently loosen and remove the side casing by firmly pulling with your fingers.
  • Gently loosen and remove the side casing by firmly pulling with your fingers.

  • Take care not to break the fragile part or to scratch the LCD screen.

コメントを追加する

Remove the two screws connecting the front casing to the electrical components.
  • Remove the two screws connecting the front casing to the electrical components.

コメントを追加する

Gently loosen the front casing.
  • Gently loosen the front casing.

  • Be careful not to scratch any of the exposed electrical components.

コメントを追加する

Fully remove the front casing from the camera.
  • Fully remove the front casing from the camera.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

Julio Maravilla

メンバー登録日: 2010年04月15日

191 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 33-73, Johann Spring 2010 Cal Poly, Team 33-73, Johann Spring 2010人のメンバー

CPSU-JOHANN-S10S33G73

3 メンバー

2のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 5,714