はじめに

The back cover needs to be removed for most other repair guides in order to access more parts within the camera.

パーツ

パーツは必要ありません。

  1. The battery cover is located on the right side of the camera.
    • The battery cover is located on the right side of the camera.

    • Slide the cover to expose the battery.

  2. Ensure that the battery lines up properly with the slot in the camera.
    • Ensure that the battery lines up properly with the slot in the camera.

    • Slide battery in.

    • Slide cover closed.

    • Battery not shown

  3. Remove screws from outside of camera. There are 6 screws total. 3 screws on underside. 1 screw on right side, near battery cover.
    • Remove screws from outside of camera. There are 6 screws total.

    • 3 screws on underside.

    • 1 screw on right side, near battery cover.

    • 2 screws on left side.

  4. Use screwdriver to remove screws.
    • Use screwdriver to remove screws.

  5. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  6. Gently pull the front cover off of the main camera.
    • Gently pull the front cover off of the main camera.

    • All of the inner parts of the camera are attached to the back screen.

  7. The front cover is now removed from the camera and the internal hardware is now exposed.
    • The front cover is now removed from the camera and the internal hardware is now exposed.

  8. This is the camera without the front cover.
    • This is the camera without the front cover.

  9. Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.
    • Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.

  10. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.
    • Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.

  11. Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side.
    • Pull apart the inner hardware from the back case by prying on the left side.

  12. Remove the back cover.
    • Remove the back cover.

  13. The back cover is now removed from the internal hardware.
    • The back cover is now removed from the internal hardware.

まとめ

To reassemble your device, follow these instructions in reverse order.

Stephannie Allen

メンバー登録日: 2013年03月11日

189 ポイント

10のガイドは作成済み

チーム

Clemson, Team 13-1, Benson Spring 2013 Clemson, Team 13-1, Benson Spring 2013人のメンバー

CLEM-BENSON-S13S13G1

4 メンバー

10のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 360