はじめに

Follow this guide for the process of replacing the CCD chip, which is responsible for converting light into digital images. For safety reasons, battery should be first removed.

Locate the cover on the bottom of the camera.
  • Locate the cover on the bottom of the camera.

  • Slide the cover towards the back of the camera.

  • Be careful—the battery can slide out on its own.

コメントを追加する

Carefully remove the exposed battery.
  • Carefully remove the exposed battery.

    • If it is difficult to remove, flip over the camera and the battery will slide out.

コメントを追加する

Locate and remove the 3mm screws on the bottom and sides of the camera with a JIS size #0  screwdriver. Locate and remove the 3mm screws on the bottom and sides of the camera with a JIS size #0  screwdriver. Locate and remove the 3mm screws on the bottom and sides of the camera with a JIS size #0  screwdriver.
  • Locate and remove the 3mm screws on the bottom and sides of the camera with a JIS size #0 screwdriver.

コメントを追加する

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Pull the two halves of the camera apart.
  • Pull the two halves of the camera apart.

  • Place the two halves down with the insides facing you.

コメントを追加する

Find the two clips holding the motherboard to the black lens box.
  • Find the two clips holding the motherboard to the black lens box.

  • Slide the plastic opening tool in between the ribbon and the black part of the clip, then flip it up. (If difficult, your fingernail can also be used)

コメントを追加する

After releasing the clips, pull out the black lens box.
  • After releasing the clips, pull out the black lens box.

  • If the black lens box does not come out, go back to the previous step and make sure you released the correct clips.

コメントを追加する

Locate and unscrew the two 3mm screws on the bottom of the black lens box with the JIS #0 screwdriver.
  • Locate and unscrew the two 3mm screws on the bottom of the black lens box with the JIS #0 screwdriver.

コメントを追加する

With the tweezers remove the black tape to detach the chip from the lens box.
  • With the tweezers remove the black tape to detach the chip from the lens box.

コメントを追加する

Grab the chip with your thumbs and carefully pull it off. The copper tab will be glued to the lens box. Be careful not to rip it.
  • Grab the chip with your thumbs and carefully pull it off.

  • The copper tab will be glued to the lens box. Be careful not to rip it.

    • The attached copper ribbons are part of the CCD chip.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Rosario

メンバー登録日: 2012年04月12日

24 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 7-35, Maness Spring 2012 Cal Poly, Team 7-35, Maness Spring 2012人のメンバー

CPSU-MANESS-S12S7G35

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 7

過去 30 日: 23

今までの合計 2,849