メインコンテンツにスキップ

はじめに

If the battery is not holding charge like it used to, then it may be time to replace it.

  1. Make sure the camera is powered off
    • Make sure the camera is powered off

    • Turn the camera upside down. This is a view of the bottom of the camera.

  2. Push battery cover away from the camera.
    • Push battery cover away from the camera.

  3. Push the blue tab that secures the battery. The battery will then spring out.
    • Push the blue tab that secures the battery. The battery will then spring out.

  4. Remove the battery. Remove the battery.
    • Remove the battery.

まとめ

To reassemble your device, follow these instructions in reverse order. Make sure to not skip a step as it will not work correctly if there was an error in reassembling the camera.

ある他の人がこのガイドを完成しました。

Elizabeth Surface

メンバー登録日: 2015年08月26日

1,386 ポイント

9のガイドは作成済み

チーム

USF Tampa, Team 4-6, Meier Fall 2015 USF Tampa, Team 4-6, Meier Fall 2015人のメンバー

USFT-MEIER-F15S4G6

4 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 21

今までの合計 1,777