メインコンテンツにスキップ

Sony Alpha NEX-C3 Control Wheel Replacement

必要な工具と部品

  1. Sony Alpha NEX-C3 Control Wheel Replacement, Top Panel: 手順 1、 1の画像 1
    • Turn the camera off by sliding the power switch.

  2. Sony Alpha NEX-C3 Control Wheel Replacement: 手順 2、 1の画像 1
    • Use a Phillips head 000 screwdriver to remove the 4.0mm screw inside the USB port.

  3. Sony Alpha NEX-C3 Control Wheel Replacement: 手順 3、 1の画像 1
    • Use a Phillips head 000 screwdriver to remove the one 4.0mm screw on the side opposite of the USB port near the shutter button.

  4. Sony Alpha NEX-C3 Control Wheel Replacement: 手順 4、 2の画像 1 Sony Alpha NEX-C3 Control Wheel Replacement: 手順 4、 2の画像 2
    • Open the flap at the top of the camera.

    • Use a Phillips head 000 screwdriver to remove the two 4.0mm screws inside.

  5. Sony Alpha NEX-C3 Control Wheel Replacement: 手順 5、 1の画像 1
    • Gently lift off the top panel with your hands.

  6. Sony Alpha NEX-C3 Control Wheel Replacement, Back Panel: 手順 6、 1の画像 1
    • Use a Phillips head 000 screwdriver to remove the 4.0mm screw at the side opposite of the USB port.

  7. Sony Alpha NEX-C3 Control Wheel Replacement: 手順 7、 2の画像 1 Sony Alpha NEX-C3 Control Wheel Replacement: 手順 7、 2の画像 2
    • Use a Phillips head 000 screwdriver to remove the three 4.0mm screws on the bottom of the camera.

  8. Sony Alpha NEX-C3 Control Wheel Replacement: 手順 8、 1の画像 1
    • Tilt up the LCD screen.

    • Use a Phillips head 000 screwdriver to remove the two coarse 4.0mm screws near the bottom of the camera.

  9. Sony Alpha NEX-C3 Control Wheel Replacement: 手順 9、 1の画像 1
    • Gently pry off the back panel, by wiggling it around the LCD screen.

  10. Sony Alpha NEX-C3 Control Wheel Replacement, Control Wheel: 手順 10、 2の画像 1 Sony Alpha NEX-C3 Control Wheel Replacement, Control Wheel: 手順 10、 2の画像 2
    • Tilt up the LCD screen.

    • Grab the silver plate, and gently pry it up.

  11. Sony Alpha NEX-C3 Control Wheel Replacement: 手順 11、 2の画像 1 Sony Alpha NEX-C3 Control Wheel Replacement: 手順 11、 2の画像 2
    • Gently pinch blue ribbon cable, and pull it out of the port.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Jonathan Chen

メンバー登録日: 10/17/17

690 ポイント

6のガイドは作成済み

チーム

UC Santa Barbara, Team S1-G1, Weedon Fall 2017 UC Santa Barbara, Team S1-G1, Weedon Fall 2017人のメンバー

UCSB-WEEDON-F17S1G1

3 メンバー

13のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 12

過去 30 日: 36

今までの合計 3,106