メインコンテンツにスキップ

はじめに

If the bass in your Sonos Playbase is weak or distorted, the subwoofer may be failing or non-functional. This guide shows you how to remove and replace the subwoofer.

    • Turn the Playbase upside down so that the "Sonos Playbase" imprint is face up.

    • Remove the bottom panel with an Opening Tool by inserting underneath and prying upwards.

    • Melt the adhesive with an iOpener for ease of opening

    • Use a Metal Spudger if the plastic spudgers do not work.

    • Take care to avoid damaging the plastic or the device if using a metal spudger.

    • Remove the fourteen 11mm T-10 screws by turning counter-clockwise.

    • Remove the seven 44mm T-20 screws by turning counter-clockwise.

    • Remove the twenty-two 34mm T-20 screws by turning counter-clockwise.

    • Record where each screw belongs for easier reassembly.

    • Remove the metal plate with a Opening Tool by inserting underneath and prying upwards.

    • Use a metal spudger if plastic openers do not work.

    • Take care to avoid damaging the plastic or the device if using a metal spudger.

    • Remove the three 18mm T-20 length screws by turning counter-clockwise and pulling up.

    • Remove the three 38mm T-55 length screws by turning counter-clockwise and pulling up.

  1. Unclip the red and black wiring from the subwoofer by pulling them away from the subwoofer. Unclip the red and black wiring from the subwoofer by pulling them away from the subwoofer.
    • Unclip the red and black wiring from the subwoofer by pulling them away from the subwoofer.

  2. Remove the subwoofer by gently lifting it up.
    • Remove the subwoofer by gently lifting it up.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Clayton Lipping

メンバー登録日: 2018年10月08日

165 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team S17-G2, White Fall 2018 Cal Poly, Team S17-G2, White Fall 2018人のメンバー

CPSU-WHITE-F18S17G2

4 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 29

今までの合計 337