メインコンテンツにスキップ

はじめに

If the ceiling fan comes with a remote control to switch on and off moving really slow at maximum speed. This video guide will definitely helps solving it.

ビデオの概要

  1. Specification for capacitor are sometimes printed at the size. This brand uses 0.82uF 275V capacitor. Specification varies with brand. Specification for capacitor are sometimes printed at the size. This brand uses 0.82uF 275V capacitor. Specification varies with brand. Specification for capacitor are sometimes printed at the size. This brand uses 0.82uF 275V capacitor. Specification varies with brand.
    • Specification for capacitor are sometimes printed at the size. This brand uses 0.82uF 275V capacitor. Specification varies with brand.

  2. It will be so much easier if the board can be clamp down using the board repair clamp to hold the board while desoldering the correct capacitor.
    • It will be so much easier if the board can be clamp down using the board repair clamp to hold the board while desoldering the correct capacitor.

  3. Simple suction pump required to remove the molten fuse.
    • Simple suction pump required to remove the molten fuse.

  4. Cut off the excess length using a tiny cutter after a new capacitor is being soldered onto the board.
    • Cut off the excess length using a tiny cutter after a new capacitor is being soldered onto the board.

  5. Test the fan if it is moving at maximum speed after the capacitor is being replaced before assembling it.
    • Test the fan if it is moving at maximum speed after the capacitor is being replaced before assembling it.

終わりに

Test the board if working before reassembly the circuit board back into the ceiling fan.

SengChoy Liew

メンバー登録日: 2012年03月12日

822 ポイント

3のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 16

過去 30 日: 88

今までの合計 2,369