はじめに
This guide will be used to instruct a person how to replace the spring that controls the up and down motion of the carbonation button should it become worn over time.
-
-
Press in the two gray buttons found on either side, at the top of the machine.
-
Pull back on the cover until it releases from the device and pull the back off.
-
-
-
-
Place your hand under the carbonation button and gently pull up and away from you, towards the back of the machine.
-
-
-
Remove the spring located under the carbonation button.
-
Replace with the new spring, by lining it up and pushing it down.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
5 の人々がこのガイドを完成させました。
チーム
University of Kentucky Louisville, Team 1-2, Mathis Fall 2014 University of Kentucky Louisville, Team 1-2, Mathis Fall 2014人のメンバー
LOUISVILLE-MATHIS-F14S1G2
3 メンバー
7のガイドは作成済み
2 件のコメント
Do we know the spring parameters?
Outside Diameter
Inside Diameter
Overall Length
Wire Diameter
Total # of Coils
Active # of Coils
Solid Height
Space between the Coils
