はじめに

This guide will instruct a person on how to replace the carbonation tube line used in the delivery of CO2.

Locate the two prongs at the bottom of the button which releases the bottles (at the front of the machine). Push both prongs down together;  pull this part of the machine out towards you.
  • Locate the two prongs at the bottom of the button which releases the bottles (at the front of the machine).

  • Push both prongs down together; pull this part of the machine out towards you.

コメントを追加する

Press in the two gray oval shaped buttons found on either side. Gently pull back on the cover until it releases from the device.
  • Press in the two gray oval shaped buttons found on either side.

  • Gently pull back on the cover until it releases from the device.

  • Release the buttons and pull the back completely off.

コメントを追加する

Place your hand under the carbonation button and pull up and away from you, towards the back of the machine. Warning: be careful not to pull too hard on the carbonation button; there is a spring under this button that can become loose.
  • Place your hand under the carbonation button and pull up and away from you, towards the back of the machine.

    • Warning: be careful not to pull too hard on the carbonation button; there is a spring under this button that can become loose.

コメントを追加する

Under the carbonation button, at the end of the slim black tube will be a white cap, turn the cap in  a counter clock wise motion to remove. Locate the second white cap, on the front of the machine. Reattach both white caps by turning them in a clockwise direction, ensuring they are on tight.
  • Under the carbonation button, at the end of the slim black tube will be a white cap, turn the cap in a counter clock wise motion to remove.

  • Locate the second white cap, on the front of the machine. Reattach both white caps by turning them in a clockwise direction, ensuring they are on tight.

コメントを追加する

Line up the prongs on the front cover with those on the machine and gently push until in place.
  • Line up the prongs on the front cover with those on the machine and gently push until in place.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Katie Fetters

メンバー登録日: 2014年09月17日

620 ポイント

4のガイドは作成済み

チーム

University of Kentucky Louisville, Team 1-2, Mathis Fall 2014 University of Kentucky Louisville, Team 1-2, Mathis Fall 2014人のメンバー

LOUISVILLE-MATHIS-F14S1G2

3 メンバー

4のガイドは作成済み

Where do you find that black tube with the white caps on the internet. My white cap broke and can't find the replacement part.

Craig V - 返信

mine broke too. plastic nut split in half. probably from chill of CO2 expansion.

where to get replacement part?

brockybeek - 返信

I’m trying to find this nut and tube everywhere. any idea where we can purcase it? or the size and pitch of the nuts au tube?

Michel Bastien - 返信

that makes four of us— where’s the tubing available??

jess youngquest - 返信

コメントを追加する

統計データを表示:

過去 24時間: 4

過去 7 日: 26

過去 30 日: 122

今までの合計 5,340