はじめに

In this guide, the reader will learn how to properly remove an empty CO2 tank and replace it with a new full tank.

ツール

工具は必要ありません。

パーツ

Remove the back cover of the device. Press in the two gray buttons found on either side, located at the top of the machine. Pull back on the cover until it releases from the device. Pull the back completely off.
  • Remove the back cover of the device. Press in the two gray buttons found on either side, located at the top of the machine.

  • Pull back on the cover until it releases from the device. Pull the back completely off.

コメントを追加する

Grasp your hand firmly around the CO2 tank and twist it in a clockwise motion. Once the CO2 tank is free, pull it towards you and lift upwards to remove it from the device.
  • Grasp your hand firmly around the CO2 tank and twist it in a clockwise motion.

  • Once the CO2 tank is free, pull it towards you and lift upwards to remove it from the device.

コメントを追加する

Insert the full CO2 tank up through the hole, located at the bottom of the device. Line up the new CO2 tank with the valve at the top and twist the tank in, using a counter clockwise motion.
  • Insert the full CO2 tank up through the hole, located at the bottom of the device.

  • Line up the new CO2 tank with the valve at the top and twist the tank in, using a counter clockwise motion.

コメントを追加する

Line up the small tab on the back cover with its slot near the bottom of the device.
  • Line up the small tab on the back cover with its slot near the bottom of the device.

  • Gently push the CO2 tank cover completely back onto the machine.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Katie Fetters

メンバー登録日: 2014年09月17日

620 ポイント

4のガイドは作成済み

チーム

University of Kentucky Louisville, Team 1-2, Mathis Fall 2014 University of Kentucky Louisville, Team 1-2, Mathis Fall 2014人のメンバー

LOUISVILLE-MATHIS-F14S1G2

3 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 21

過去 30 日: 90

今までの合計 2,382