Smartab STJR700 Home Button Replacement - iFixit 修理ガイド

はじめに

This repair guide should only be used if all other options have been exhausted and the tablet's home button is still unresponsive. Before attempting to replace the home button, make sure the unresponsive home button is not experiencing a software issue.

必要な工具と部品

手順1 Home Button

Smartab STJR700 Home Button Replacement, Home Button: 手順 1、 2の画像 1

Smartab STJR700 Home Button Replacement, Home Button: 手順 1、 2の画像 2

Power off device. Place it face down. Unscrew the four perimeter screws using a PH000.

手順2

Smartab STJR700 Home Button Replacement: 手順 2、 1の画像 1

Using a plastic opening tool or metal spudger, begin to gently pry the rear case down and away from the display. Slowly wiggle the tool up and down to pry open the tablet. Once the rear case is fully removed, place it to the side.

手順3

Smartab STJR700 Home Button Replacement: 手順 3、 3の画像 1

Smartab STJR700 Home Button Replacement: 手順 3、 3の画像 2

Smartab STJR700 Home Button Replacement: 手順 3、 3の画像 3

Using tweezers, carefully remove the tape that is holding the black and red intertwined cables to the motherboard. Place tape to the side as it will be needed for reassembly.

手順4

Smartab STJR700 Home Button Replacement: 手順 4、 1の画像 1

Remove the two Phillips #000 screws holding the home button board to the front panel.

手順5

Smartab STJR700 Home Button Replacement: 手順 5、 2の画像 1

Smartab STJR700 Home Button Replacement: 手順 5、 2の画像 2

Using tweezers, slowly and carefully remove the end of the cable that connects the home button to the main motherboard.

終わりに

To ensure a successful replacement make sure to follow all steps carefully .

作成者

4人の作成者と共同で作成されました。

Moriah Wiggins

メンバー登録日: 03/08/17

201 ポイント

2のガイドは作成済み

チーム

UMass Dartmouth, Team S3-G4, Botvin Spring 2017 UMass Dartmouth, Team S3-G4, Botvin Spring 2017人のメンバー

UMASSD-BOTVIN-S17S3G4

4 メンバー

5のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 4

今までの合計 302