Smartab STJR700 Charging Port Replacement

はじめに

This guide will show you how to replace the charging port in a Smartab STJR700 tablet. After determining all options have been attempted and the tablet still doesn't charge, then refer to this repair guide. Prior to fixing the device, ensure that there aren't any other hardware issues. Hardware issues include damages in the charger and faulty battery.

必要な工具と部品

手順1 Charging Port

Smartab STJR700 Charging Port Replacement, Charging Port: 手順 1、 1の画像 1

Power off the device by holding down the lock button. Remove the case from the tablet and place it face down.

翻訳

手順2

Unscrew all four corner screws using the PH000 screwdriver head found in the iFixit kit.

翻訳

手順3

CAUTION: Avoid touching the display.
Pry open the tablet using a metal spudger. Set aside the back panel.

翻訳

手順4

Locate the charging port.

翻訳

手順5

Unscrew all the labeled screws using the PH000 screwdriver head.

翻訳

手順6

Remove all pieces of tape using the tweezers provided in the iFixit kit.
Remove the two ribbon cables affixed to the camera.

翻訳

手順7

Remove the motherboard component from the screen and display.
Because the charging port is soldered onto the motherboard, the motherboard must be replaced by one specifically made for the Smartab STJR700.

翻訳