メインコンテンツにスキップ

はじめに

The purpose of this guide is to show the steps necessary to remove the casing of the Slingbox and replace the motherboard.

パーツ

パーツは指定されていません。

  1. Use the plastic opening tool to remove the four rubber pads from the bottom of the device.
    • Use the plastic opening tool to remove the four rubber pads from the bottom of the device.

  2. The Slingbox has four black 5mm screws, one on each corner of the case. Remove the four black 5mm screws using the PH1 screwdriver. Gently pull and separate the two case covers.
    • The Slingbox has four black 5mm screws, one on each corner of the case.

    • Remove the four black 5mm screws using the PH1 screwdriver.

    • Gently pull and separate the two case covers.

  3. The motherboard has five silver 5.5mm screws connecting it to the base of the Slingbox. Remove the five silver screws on the motherboard using the PH1 screwdriver. Gently slide and separate the motherboard from the base.
    • The motherboard has five silver 5.5mm screws connecting it to the base of the Slingbox.

    • Remove the five silver screws on the motherboard using the PH1 screwdriver.

    • Gently slide and separate the motherboard from the base.

終わりに

To reassemble your device, follow these instructions in reverse order.

Nitin Muralidhar

メンバー登録日: 2016年07月18日

222 ポイント

2のガイドは作成済み

チーム

IUPUI, Team 2-2, Harley SU 2016 IUPUI, Team 2-2, Harley SU 2016人のメンバー

IUPUI-HARLEY-SU16S2G2

5 メンバー

2のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 5

今までの合計 462