メインコンテンツにスキップ

SkullCandy Hesh Size Adjuster Replacement

必要な工具と部品

  1. SkullCandy Hesh Size Adjuster Replacement, Determine the damage: 手順 1、 2の画像 1 SkullCandy Hesh Size Adjuster Replacement, Determine the damage: 手順 1、 2の画像 2
    • Locate the break in the device.

  2. SkullCandy Hesh Size Adjuster Replacement: 手順 2、 1の画像 1
    • Use a Phillips #0 screwdriver to remove the two 9 mm screws from the bottom inner casing beneath the break.

  3. SkullCandy Hesh Size Adjuster Replacement: 手順 3、 1の画像 1
    • Remove the bottom inner casing to reveal the wire compartment and the port where the slider inserts.

  4. SkullCandy Hesh Size Adjuster Replacement: 手順 4、 2の画像 1 SkullCandy Hesh Size Adjuster Replacement: 手順 4、 2の画像 2
    • Cover the detached slider port in a generous layer of Plasti Dip, which works like glue. Also coat any exposed wire to seal the circuit.

  5. SkullCandy Hesh Size Adjuster Replacement: 手順 5、 1の画像 1
    • Realign the broken size adjuster into the port with the Plasti Dip so that it can be secured to the ear piece.

  6. SkullCandy Hesh Size Adjuster Replacement: 手順 6、 1の画像 1
    • Clamp the pieces in place by hand or with a binder clip until the Plasti Dip dries. Feel free to use a hair dryer on a low setting to speed up the process.

終わりに

To reassemble your device, reattach the bottom inner casing with the Phillips #0 screwdriver and two removed screws.

作成者

5人の作成者と共同で作成されました。

Sarah Burk

メンバー登録日: 01/15/15

247 ポイント

3のガイドは作成済み

チーム

USF Sarasota-Manatee, Team 1-1, Stewart Winter 2015 USF Sarasota-Manatee, Team 1-1, Stewart Winter 2015人のメンバー

USFSM-STEWART-W15S1G1

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 12

今までの合計 800