メインコンテンツにスキップ

Signode BXT3-16 Strapping Combo Tool Spring Replacement

必要な工具と部品

  1. Signode BXT3-16 Strapping Combo Tool Spring Replacement, Spring: 手順 1、 1の画像 1
    • Before dismantling the strapping gun, ensure the power source / battery is removed.

  2. Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 2、 1の画像 1
    • Turn the strapping gun upside down.

    • Place it on a flat surface to keep the strapping gun stable during repair.

    • There are four Torx T4 screws on the bottom of the tool.

  3. Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 3、 3の画像 1 Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 3、 3の画像 2 Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 3、 3の画像 3
    • Use the Torx T4 screwdriver to remove the four 25 mm screws from the base plate.

    • Remove the single 25 mm Torx T4 screw from the front side of the strapping gun.

    • Use a Torx T4 screwdriver to remove the two 25 mm screws on the front of the tool.

  4. Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 4、 1の画像 1
    • Rotate the strapping gun to the opposite side.

    • Use the Torx T4 screwdriver to remove the remaining 25 mm screws from the front of the strapping gun.

  5. Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 5、 2の画像 1 Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 5、 2の画像 2
    • Rotate the strapping tool to the original position, with the model number and name facing you.

    • Firmly pull the guard plate and the tool apart using both hands.

  6. Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 6、 2の画像 1 Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 6、 2の画像 2
    • Use a metal spudger to lift the cutter.

    • Gently, push the spring out from the bottom of the base of the strapping gun.

  7. Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 7、 3の画像 1 Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 7、 3の画像 2 Signode BXT3-16 Strapping Combo Tool Spring Replacement: 手順 7、 3の画像 3
    • Rotate the machine to remove the spring gently by hand.

    • Remove the spring from the base of the strapping tool.

    • Replace with new spring by inserting it the same way it was removed.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Jainam Shah

メンバー登録日: 02/01/24

160 ポイント

1ガイドが承認済み

チーム

York University, Team M-10, Allen Winter 2024 York University, Team M-10, Allen Winter 2024人のメンバー

YORK-ALLEN-W24SMG10

3 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 10

過去 30 日: 25

今までの合計 123