メインコンテンツにスキップ

Shower Handle O-ring Replacement

必要な工具と部品

  1. Shower Handle O-ring  Replacement, Shower Handle O-ring: 手順 1、 1の画像 1
    • Be sure your water main is turned off, preventing water flow to your shower.

    • Using your flat head screwdriver, remove the screw from the middle of the handle.

  2. Shower Handle O-ring  Replacement: 手順 2、 1の画像 1
    • Use your groove joint pliers to loosen and remove the escutcheon plate.

  3. Shower Handle O-ring  Replacement: 手順 3、 1の画像 1
    • Using your groove joint pliers, loosen and remove the cartridge stem.

  4. Shower Handle O-ring  Replacement: 手順 4、 1の画像 1
    • Slowly unscrew and remove the stem completely.

    • There may be some water leakage due to built up pressure.

  5. Shower Handle O-ring  Replacement: 手順 5、 2の画像 1 Shower Handle O-ring  Replacement: 手順 5、 2の画像 2
    • Using your flat head screwdriver, remove the screw from the end of the stem cartridge.

    • Once the screw is removed, replace the damaged O-ring with the new replacement O-ring.

    • When installing a new O-ring, be sure the O-ring has a tight seal to prevent further leaking.

    • Once reassembly is complete and all parts are snug, turn the water main back on to allow water to flow to the shower again.

ゴール

3 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Cori Fitzpatrick

メンバー登録日: 03/20/16

213 ポイント

1ガイドが承認済み

チーム

Michigan Tech, Team 1-6, Lauer Spring 2016 Michigan Tech, Team 1-6, Lauer Spring 2016人のメンバー

MTU-LAUER-S16S1G6

1 メンバー

1のガイドは作成済み

2 件のコメント

I have to change my shower handle, but the plumber asking me to change the shower valve also. But I can’t see any reason to replace the shower valve, is it really necessary to change it when changing shower handle.

Thanks.

Rose Geiger - 返信

This fixed the dripping shower head but now my shower handles are tight and difficult to turn and the water pressure is affected after replacing the o-rings. What could the issue be?

Cin - 返信

コメントを追加

統計データ:

過去 24時間: 6

過去 7 日: 51

過去 30 日: 271

今までの合計 20,816