Shenzhou k680e Silicone Grease Replacement

はじめに

This guide will teach you how to clean your fan and replace the silicone grease in your Shenzhou k680e laptop. Too much dust in the fan of your laptop will seriously weaken the heat radiation of your computer. It will make your computer work slowly and can lead to a crash which would cost you a lot of time. In addition, silicone grease on the chips plays an important role on heat radiation, so it’s important to replace it after a long time.

必要な工具と部品

手順1 Silicone Grease

Shenzhou k680e Silicone Grease Replacement, Silicone Grease: 手順 1、 1の画像 1

Place the computer on a table so that its bottom surface is facing you.

編集

手順2

Remove all the screws on the bottom with a screwdriver.

編集

手順3

Slide the battery upwards to remove it from the laptop.

編集

手順4

Pry the back panel away from the laptop using an opening tool.

編集

手順5

Remove the screws from the fan.
Detach the fan's wire from the motherboard.

編集

手順6

Remove the fans from the laptop.

編集

手順7

Use a brush or an electric fan to clean the dust on the fans.
Don't use your finger to clean it because it may cause permanent damage to the fan.

編集

手順8

Remove the screws from the CPU in the following order according to the index numbers beside the screws: 3, 2, 1.
When you reinstall these screws you should follow the order: 1, 2, 3.

編集

手順9

Remove the heat sink from the laptop.
There is some old thermal paste on the copper section of the heat sink.

編集

手順10

Use an alcohol wipe to clean the thermal paste on the copper sheet.
You must use an alcohol wipe since alcohol is volatile and will not stay inside the computer, unlike water.

編集