メインコンテンツにスキップ

はじめに

This is a simple solution for replacing a broken or malfunctioning stand for the Sharp Aquos LC13B2UA TV. This repair uses screws instead of glue to attach the replacement stand for a solid hold.

Before beginning these instructions, clear the area of any liquids, turn the TV off, and unplug the power cord from the AC outlet. Be sure that the replacement part is identical to the original.

パーツ

パーツは指定されていません。

  1. Place the TV face down on a flat smooth surface as to not scratch the screen. Using a Phillips #2 screwdriver remove the four 8mm screws attaching the stand to the TV.
    • Place the TV face down on a flat smooth surface as to not scratch the screen.

    • Using a Phillips #2 screwdriver remove the four 8mm screws attaching the stand to the TV.

  2. Lift the stand off the television. Lift the stand off the television.
    • Lift the stand off the television.

終わりに

To reassemble your device, follow these instructions in reverse order.

Robert Hobson

メンバー登録日: 2011年01月20日

1,275 ポイント

9のガイドは作成済み

チーム

Cal Poly, Team 1-11, Amido Winter 2011 Cal Poly, Team 1-11, Amido Winter 2011人のメンバー

CPSU-AMIDO-W11S1G11

4 メンバー

9のガイドは作成済み

コメント1件

My Sharp Aquas TV won't come on it flashes 1 long and 1 short.

dancer70 - 返信

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 4

過去 30 日: 9

今までの合計 4,659