はじめに

Outline what you are going to teach someone how to do.

パーツ

パーツは必要ありません。

  1. Place the TV face down on a flat smooth surface as to not scratch the screen. Remove the four 8mm screws attaching the stand to the TV.
    • Place the TV face down on a flat smooth surface as to not scratch the screen.

    • Remove the four 8mm screws attaching the stand to the TV.

  2. Lift the stand off the television. Lift the stand off the television.
    • Lift the stand off the television.

  3. Remove the two back panels to display the audio and video inputs.. Remove the two back panels to display the audio and video inputs.. Remove the two back panels to display the audio and video inputs..
    • Remove the two back panels to display the audio and video inputs..

  4. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  5. Remove the eight 6mm Phillips screws around the edge. Remove the two 6mm Phillips near the inputs.
    • Remove the eight 6mm Phillips screws around the edge.

    • Remove the two 6mm Phillips near the inputs.

  6. Lift and remove the back case of the television.
    • Lift and remove the back case of the television.

  7. Remove the eight 9mm screws from both speakers. DO NOT remove speakers yet - they are still attached.
    • Remove the eight 9mm screws from both speakers.

    • DO NOT remove speakers yet - they are still attached.

  8. Remove the two speaker cables from the circuit board by pinching the plastic connectors and firmly pulling up. Pull on the plastic part of the connector, even though it may seem easiest to pull on the wires.
    • Remove the two speaker cables from the circuit board by pinching the plastic connectors and firmly pulling up.

    • Pull on the plastic part of the connector, even though it may seem easiest to pull on the wires.

    • DO NOT remove speakers yet - they are still attached.

  9. Remove the two black tape strips (one on each side) securing the power cable to the frame. The speakers can now be removed.
    • Remove the two black tape strips (one on each side) securing the power cable to the frame.

    • The speakers can now be removed.

まとめ

To reassemble your device, follow these instructions in reverse order.

Robert Hobson

メンバー登録日: 2011年01月20日

1,275 ポイント

9のガイドは作成済み

チーム

Cal Poly, Team 1-11, Amido Winter 2011 Cal Poly, Team 1-11, Amido Winter 2011人のメンバー

CPSU-AMIDO-W11S1G11

4 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 11

今までの合計 3,972