メインコンテンツにスキップ

Sharp Aquos LC13B2UA Power Button Replacement

必要な工具と部品

  1. Sharp Aquos LC13B2UA Power Button Replacement, Stand: 手順 1、 2の画像 1 Sharp Aquos LC13B2UA Power Button Replacement, Stand: 手順 1、 2の画像 2
    • Place the TV face down on a flat smooth surface as to not scratch the screen.

    • Using a Phillips #2 screwdriver remove the four 8mm screws attaching the stand to the TV.

  2. Sharp Aquos LC13B2UA Power Button Replacement: 手順 2、 2の画像 1 Sharp Aquos LC13B2UA Power Button Replacement: 手順 2、 2の画像 2
    • Lift the stand off the television.

  3. Sharp Aquos LC13B2UA Power Button Replacement, Back Case: 手順 3、 3の画像 1 Sharp Aquos LC13B2UA Power Button Replacement, Back Case: 手順 3、 3の画像 2 Sharp Aquos LC13B2UA Power Button Replacement, Back Case: 手順 3、 3の画像 3
    • Remove the two back panels by prying them out with your hands.

  4. Sharp Aquos LC13B2UA Power Button Replacement: 手順 4、 2の画像 1 Sharp Aquos LC13B2UA Power Button Replacement: 手順 4、 2の画像 2
    • Using a Phillips #2 screwdriver, remove the eight 6mm Phillips screws located around the edge.

    • Using a Phillips #2 screwdriver, remove the two 6mm Phillips screws located near the inputs.

  5. Sharp Aquos LC13B2UA Power Button Replacement: 手順 5、 1の画像 1
    • Using your hands, gently lift and remove the back case of the television.

  6. Sharp Aquos LC13B2UA Power Button Replacement, Motherboard: 手順 6、 3の画像 1 Sharp Aquos LC13B2UA Power Button Replacement, Motherboard: 手順 6、 3の画像 2 Sharp Aquos LC13B2UA Power Button Replacement, Motherboard: 手順 6、 3の画像 3
    • Remove the two speaker cables and the connector from the circuit board by pinching the plastic connectors and firmly pulling up.

    • Pull on the plastic part of the connector, even though it may seem easiest to pull on the wires.

  7. Sharp Aquos LC13B2UA Power Button Replacement: 手順 7、 2の画像 1 Sharp Aquos LC13B2UA Power Button Replacement: 手順 7、 2の画像 2
    • Remove the green and gray power connector from the side of the buttons panel at the top of the television.

    • Remove the green/gray to orange/gray connector from the center of the circuit board.

  8. Sharp Aquos LC13B2UA Power Button Replacement: 手順 8、 2の画像 1 Sharp Aquos LC13B2UA Power Button Replacement: 手順 8、 2の画像 2
    • Remove the four 5mm phillips screws attaching the LCD and circuit board to the front case.

  9. Sharp Aquos LC13B2UA Power Button Replacement: 手順 9、 1の画像 1
    • Lift the circuit board/LCD block from the case by lifting the near side of the circuit board and sliding it under the button frame.

  10. Sharp Aquos LC13B2UA Power Button Replacement, Power Button: 手順 10、 3の画像 1 Sharp Aquos LC13B2UA Power Button Replacement, Power Button: 手順 10、 3の画像 2 Sharp Aquos LC13B2UA Power Button Replacement, Power Button: 手順 10、 3の画像 3
    • Remove the two 6mm Phillips screws.

    • Pull the board toward you, giving you access to the power button.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Robert Hobson

メンバー登録日: 01/20/11

1,275 ポイント

9のガイドは作成済み

チーム

Cal Poly, Team 1-11, Amido Winter 2011 Cal Poly, Team 1-11, Amido Winter 2011人のメンバー

CPSU-AMIDO-W11S1G11

4 メンバー

9のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 16

今までの合計 6,499