メインコンテンツにスキップ

はじめに

This guide will show how to replace the back panel of your Sharp Aquos LC13B2UA LCD Television.

パーツ

パーツは指定されていません。

  1. Place the TV face down on a flat smooth surface as to not scratch the screen. Using a Phillips #2 screwdriver remove the four 8mm screws attaching the stand to the TV.
    • Place the TV face down on a flat smooth surface as to not scratch the screen.

    • Using a Phillips #2 screwdriver remove the four 8mm screws attaching the stand to the TV.

  2. Lift the stand off the television. Lift the stand off the television.
    • Lift the stand off the television.

  3. Remove the two back panels by prying them out with your hands. Remove the two back panels by prying them out with your hands. Remove the two back panels by prying them out with your hands.
    • Remove the two back panels by prying them out with your hands.

  4. Using a Phillips #2 screwdriver, remove the eight 6mm Phillips screws located around the edge. Using a Phillips #2 screwdriver, remove the two 6mm Phillips screws located near the inputs.
    • Using a Phillips #2 screwdriver, remove the eight 6mm Phillips screws located around the edge.

    • Using a Phillips #2 screwdriver, remove the two 6mm Phillips screws located near the inputs.

  5. Using your hands, gently lift and remove the back case of the television.
    • Using your hands, gently lift and remove the back case of the television.

終わりに

To reassemble your device, follow these instructions in reverse order.

Robert Hobson

メンバー登録日: 2011年01月20日

1,275 ポイント

9のガイドは作成済み

チーム

Cal Poly, Team 1-11, Amido Winter 2011 Cal Poly, Team 1-11, Amido Winter 2011人のメンバー

CPSU-AMIDO-W11S1G11

4 メンバー

9のガイドは作成済み

コメント1件

How do you remove the casing of a sharp LC26SB25E ? Please.

alan - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 30

今までの合計 3,622