Shark Professional Steam Pocket Mop Head Replacement - iFixit 修理ガイド

はじめに

If you need to replace or re-install the mop head of your Steam Pocket Mop, this guide will walk you through the process. There are no tools needed.

手順1 Mop Head

Shark Professional Steam Pocket Mop Head Replacement, Mop Head: 手順 1、 2の画像 1

Shark Professional Steam Pocket Mop Head Replacement, Mop Head: 手順 1、 2の画像 2

Turn off the Steam Pocket Mop and unplug it from the wall.
Be sure that any water in the water tank cools before proceeding.

手順2

Shark Professional Steam Pocket Mop Head Replacement: 手順 2、 3の画像 1

Shark Professional Steam Pocket Mop Head Replacement: 手順 2、 3の画像 2

Shark Professional Steam Pocket Mop Head Replacement: 手順 2、 3の画像 3

Push down on the round, grey release button near the connection point, while pulling the mop head out.
The mop head should slide out and detach.
When reassembling, you should hear it click into place if it is properly installed.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Tyler Wicke

メンバー登録日: 10/17/18

237 ポイント

2のガイドは作成済み

+3 個以上のバッジ

チーム

UW Tacoma, Team S1-G3, Rose Fall 2018 UW Tacoma, Team S1-G3, Rose Fall 2018人のメンバー

UWT-ROSE-F18S1G3

4 メンバー

10のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 2

過去 7 日: 6

過去 30 日: 32

今までの合計 1,854