修理を始めるには コミュニティ ストア

Shark Professional Steam Pocket Mop Front Panel Disassembly

作成者： Brett Wilson (そして 2 人のその他投稿者)
公開日: May 21, 2018
  • コメント: 2
  • お気に入り: 0
  • 閲覧数： 3.8千

Shark Professional Steam Pocket Mop Front Panel Disassembly

作成者： Brett Wilson (そして 2 人のその他投稿者)
公開日: May 21, 2018
  • コメント: 2
  • お気に入り: 0
  • 閲覧数： 3.8千

分解

はじめに

This guide will start with opening the front panel. This will expose the control panel and more screws for further disassembly. Before doing any disassembly on your Shark Professional Steam Pocket Mop, make sure to unplug both the mop and empty the water tank for your safety.

必要な工具と部品

この分解は修理ガイドでは ありません。 お持ちのShark Professional Steam Pocket Mopを修理する際は、iFixitの修理ガイドをご利用ください。

  1. Shark Professional Steam Pocket Mop Front Panel Disassembly, Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 1、 2の画像 1 Shark Professional Steam Pocket Mop Front Panel Disassembly, Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 1、 2の画像 2

    • Unwrap the power cord from the handle.

    • Remove the 56.0 mm Phillips head #2 screw located above the water tank cap.

    • Pull the handle to separate it from the body.

    編集

  2. Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 2、 3の画像 1 Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 2、 3の画像 2 Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 2、 3の画像 3

    • Remove the three 12.0 mm Phillips head #2 screws where the handle connects to the body.

    • Remove the plastic cap.

    編集

  4. Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 3、 2の画像 1 Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 3、 2の画像 2

    • Remove the three 16.0 mm T10 Torx screws near the top of the body and remove the water tank cap.

    • The third screw is directly on other side of the bottom screw in the photo.

    編集

  5. Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 4、 3の画像 1 Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 4、 3の画像 2 Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 4、 3の画像 3

    • Remove steam control button cover with a metal spudger.

    • Remove the two 12.0 mm Phillips head #2 screws underneath.

    • Remove the plastic rim with clear plastic cover.

    編集

  6. Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 5、 3の画像 1 Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 5、 3の画像 2 Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 5、 3の画像 3

    • Remove the Shark logo decal on the front of body using a metal spudger.

    • Remove the two 12.0 mm Phillips head #2 screws underneath.

    • Pull out the plastic cover to remove.

    編集

  7. Shark Professional Steam Pocket Mop Front Panel Disassembly: 手順 6、 1の画像 1

    • Pop off the grey front plate to expose the control panel and screws necessary to open mop body.

    編集

作成者

2人の作成者と共同で作成されました。

Brett Wilson

メンバー登録日: 02/12/18

992 ポイント

6のガイドは作成済み

バッジ: 14

+11 個以上のバッジ

チーム

USF Tampa, Team S15-G1, Boczar Spring 2018 USF Tampa, Team S15-G1, Boczar Spring 2018人のメンバー

USFT-BOCZAR-S18S15G1

4 メンバー

14のガイドは作成済み

コメント 1 件

Here is a video to help with dismantling if you'd like to see the possible original guide first posted on YouTube by George Robles September 16, 2015 years before.

https://youtu.be/18mMbbMjqzs

No one knew or posted before me because I looked everywhere and why I created the video.

But I am curious where you got your information from if it was not my video.

George Robles - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 19

過去 30 日: 80

今までの合計 3,866