メインコンテンツにスキップ

はじめに

Replacing the roller brush can help improve the suction and movement of the vacuum.

  1. Lay the vacuum down by hand and locate the roller brush underneath the vacuum cleaner. Lay the vacuum down by hand and locate the roller brush underneath the vacuum cleaner.
    • Lay the vacuum down by hand and locate the roller brush underneath the vacuum cleaner.

  2. Insert the metal spudger between the inside side of the wheel and the plastic body. Push the metal spudger away from you to pop the wheels out. Repeat the step to remove the other wheel on the other side.
    • Insert the metal spudger between the inside side of the wheel and the plastic body.

    • Push the metal spudger away from you to pop the wheels out.

    • Repeat the step to remove the other wheel on the other side.

  3. Remove the six 15mm screws using the PH1 screwdriver.
    • Remove the six 15mm screws using the PH1 screwdriver.

  4. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  5. Move the blue fulcrum connecting the  bottom and the main body of the vacuum cleaner back and forth to loosen up crevice  between the two halves of the roller brush enclosure. Move the blue fulcrum connecting the  bottom and the main body of the vacuum cleaner back and forth to loosen up crevice  between the two halves of the roller brush enclosure.
    • Move the blue fulcrum connecting the bottom and the main body of the vacuum cleaner back and forth to loosen up crevice between the two halves of the roller brush enclosure.

  6. Insert the plastic opening tool into the crevice between the blue and the dark grey plastic frames enclosing the roller brush. Apply an outward force throughout and all around the gap in order to separate the two plastic frames. Apply an outward force throughout and all around the gap in order to separate the two plastic frames.
    • Insert the plastic opening tool into the crevice between the blue and the dark grey plastic frames enclosing the roller brush.

    • Apply an outward force throughout and all around the gap in order to separate the two plastic frames.

  7. Lift the grey frame off the bottom of the vacuum cleaner with your hands and place it on a flat surface. Lift the grey frame off the bottom of the vacuum cleaner with your hands and place it on a flat surface.
    • Lift the grey frame off the bottom of the vacuum cleaner with your hands and place it on a flat surface.

  8. Lift the roller brush slightly upwards  using your hand. Take one side of the black roller brush belt off by pulling it over the end of the roller brush with your other hand. Take one side of the black roller brush belt off by pulling it over the end of the roller brush with your other hand.
    • Lift the roller brush slightly upwards using your hand.

    • Take one side of the black roller brush belt off by pulling it over the end of the roller brush with your other hand.

  9. Remove the roller brush belt with your hands by sliding it of the end of the motor.
    • Remove the roller brush belt with your hands by sliding it of the end of the motor.

  10. Remove the roller brush from the plastic frame using your hands by lifting it away. Remove the roller brush from the plastic frame using your hands by lifting it away.
    • Remove the roller brush from the plastic frame using your hands by lifting it away.

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Elena Postupalskaya

メンバー登録日: 2017年10月02日

760 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team S15-G2, Livingston Fall 2017 Cal Poly, Team S15-G2, Livingston Fall 2017人のメンバー

CPSU-LIVINGSTON-F17S15G2

3 メンバー

7のガイドは作成済み

What is the part number for the roller brush?

Sean E. Belew - 返信

what is the part number for the motor and motherboard

benjpatt - 返信

コメントを追加する

統計データを表示:

過去 24時間: 6

過去 7 日: 58

過去 30 日: 262

今までの合計 5,740