メインコンテンツにスキップ

はじめに

Replace the battery when the vacuum does not turn on even after charging.

ツール

ツールは指定されていません。

  1. Turn the device over to reveal the bottom of the motorized brush head.
    • Turn the device over to reveal the bottom of the motorized brush head.

  2. Slide the latch next to the panel upwards into the unlocked position. Slide the latch next to the panel upwards into the unlocked position.
    • Slide the latch next to the panel upwards into the unlocked position.

  3. Slide the panel to the right to reveal the battery.
    • Slide the panel to the right to reveal the battery.

  4. Pull the battery from the vacuum. Pull the battery from the vacuum.
    • Pull the battery from the vacuum.

  5. Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart. Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart.
    • Disconnect the battery from the vacuum by pinching the white latch and pulling the two pieces apart.

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Zachary Liu

メンバー登録日: 2018年01月24日

523 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team S1-G5, Livingston Winter 2018 Cal Poly, Team S1-G5, Livingston Winter 2018人のメンバー

CPSU-LIVINGSTON-W18S1G5

3 メンバー

5のガイドは作成済み

コメント1件

How much is the part for the shark

sumi49 - 返信

コメントを追加する

統計データを表示:

過去 24時間: 6

過去 7 日: 34

過去 30 日: 161

今までの合計 3,582