メインコンテンツにスキップ

はじめに

This guide will show you how to replace the two filters on the top of the motor unit of the Shark IONFlex 2X.

With normal usage, the filters will not need to be replaced, but will need to be rinsed and air dried for 24 hours prior to re-insertion in the machine once every month.

  1. Squeeze the lever labeled “Clean Filters Monthly” and pull up on the plastic cover. Squeeze the lever labeled “Clean Filters Monthly” and pull up on the plastic cover.
    • Squeeze the lever labeled “Clean Filters Monthly” and pull up on the plastic cover.

  2. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  3. Grab the white foam filter inside and pull out.
    • Grab the white foam filter inside and pull out.

  4. Grab the larger side of the black plastic ring on the side of the white filter, and separate the white foam filter from the inner filter. Grab the larger side of the black plastic ring on the side of the white filter, and separate the white foam filter from the inner filter. Grab the larger side of the black plastic ring on the side of the white filter, and separate the white foam filter from the inner filter.
    • Grab the larger side of the black plastic ring on the side of the white filter, and separate the white foam filter from the inner filter.

まとめ

To reassemble your device, follow these instructions in reverse order.

Kendal Cler

メンバー登録日: 2015年09月28日

789 ポイント

6のガイドは作成済み

チーム

Eastern Washington University, Team S4-G1, Crane Fall 2018 Eastern Washington University, Team S4-G1, Crane Fall 2018人のメンバー

EWU-CRANE-F18S4G1

2 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 9

今までの合計 93