このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。
必要な工具と部品
-
この手順は未翻訳です。 翻訳を手伝う。
-
Turn the T10 Security Torx screwdriver counterclockwise to remove the 15mm screw.
I know it is absolutely essential to have a security bit on here to change the belt as you wouldn't want anyone accidently changing it.
-
-
-
この手順は未翻訳です。 翻訳を手伝う。
-
Orient the vacuum so you are looking down at the open garage of the vacuum.
-
Using your right hand, rotate the top of the silver motor towards the brush roll of the vacuum so the motor fits through the opening.
-
6 の人々がこのガイドを完成させました。
7 件のコメント
Can this motor we test it before taking it out
craigfranz - 返信
Can this motor be tested before taking it out?
craigfranz - 返信
How do I know if the motor is burned out
It must be for a different model slightly or a newer model because mine has Allen head security screws and not torques and my motor is screwed in not just popped in.
What the hell is a "spudger"?