メニュー

あなたの設定

私のワークベンチ

お持ちのデバイス用の修理ガイド、交換用パーツやアンサーフォーラムにアクセスする。
カート

カートには何も入っていません。

当社のショップを閲覧する

Separate Samsung SGH-X105 Front & Back Panels

作成者： DJ Tarazona (そして 4 人のその他投稿者)
  • コメント: 0
  • お気に入り: 0

難易度

簡単

手順

5

所要時間

10 - 15 分

セクション

2

フラグ

0

はじめに

Separate your phone's front and back cover.

ツール

これらのツールを購入する

パーツ

パーツは指定されていません。

  1. Rotate the phone onto its front side so that the LCD screen is facing away from you.

    • Rotate the phone onto its front side so that the LCD screen is facing away from you.

    翻訳

  2. Remove the battery by pressing down on the battery release button while sliding the battery downwards. Remove the battery by pressing down on the battery release button while sliding the battery downwards. Remove the battery by pressing down on the battery release button while sliding the battery downwards.

    • Remove the battery by pressing down on the battery release button while sliding the battery downwards.

    翻訳

  3. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now

  4. Remove the four small black screws that secure the back phone panel using the Phillips #00 screwdriver.

    • Remove the four small black screws that secure the back phone panel using the Phillips #00 screwdriver.

    • Complete removal of screws may not be necessary.

    翻訳

  5. Carefully separate the front and back panels by gently prying them apart. Start at the bottom of the phone (near the AC charger input). Volume control button will be unsecured and may fall out as soon as the panels are separated. Gentle force may be required to separate the panels at the top latch.

    • Carefully separate the front and back panels by gently prying them apart. Start at the bottom of the phone (near the AC charger input).

    • Volume control button will be unsecured and may fall out as soon as the panels are separated.

    • Gentle force may be required to separate the panels at the top latch.

    • There are two wires connecting the front and back panels. Be careful not to rip these wires out when separating the panels.

    翻訳

  6. Using your nails, tweezers, or any precise grabbing tool, pinch the antenna wire connector (clear plastic plug) and pull gently. It should pop out rather easily. Using your nails, tweezers, or any precise grabbing tool, pinch the antenna wire connector (clear plastic plug) and pull gently. It should pop out rather easily.

    • Using your nails, tweezers, or any precise grabbing tool, pinch the antenna wire connector (clear plastic plug) and pull gently. It should pop out rather easily.

    翻訳
まとめ

To reassemble your device, follow these instructions in reverse order.

作成者

4他の投稿者と一緒に

DJ Tarazona

メンバー登録日: 2010年04月13日

25 ポイント

3のガイドは作成済み

バッジ: 9

+6 個以上のバッジ

チーム

Cal Poly, Team 28-29, Regan Spring 2010 Cal Poly, Team 28-29, Regan Spring 2010人のメンバー

CPSU-REGAN-S10S28G29

4 メンバー

12のガイドは作成済み

0コメント

コメントを追加

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,807