パーツ

パーツは必要ありません。

Using a Phillips head screwdriver remove  six screws from the bottom of the console. The six screws are marked.
  • Using a Phillips head screwdriver remove six screws from the bottom of the console.

    • The six screws are marked.

コメントを追加する

Remove the two screws that attach the Genesis' connector to the rest of the console.
  • Remove the two screws that attach the Genesis' connector to the rest of the console.

    • The two screws are marked in the diagram.

コメントを追加する

Slide the lock tab to the left to separate the halves of the console.
  • Slide the lock tab to the left to separate the halves of the console.

コメントを追加する

Lift from the left side to remove the top of the case.
  • Lift from the left side to remove the top of the case.

コメントを追加する

Using the spudger, pry the cover off of the Genesis attachment.
  • Using the spudger, pry the cover off of the Genesis attachment.

コメントを追加する

Lift the top of the case to remove the cover.
  • Lift the top of the case to remove the cover.

コメントを追加する

Remove the faceplate by pulling it up, then out.
  • Remove the faceplate by pulling it up, then out.

コメントを追加する

Using a #00 Philips screwdriver remove the two screws that attach the Genesis adapter to the console. Disconnect the adapter from the console by carefully pulling the adapter out.
  • Using a #00 Philips screwdriver remove the two screws that attach the Genesis adapter to the console.

  • Disconnect the adapter from the console by carefully pulling the adapter out.

コメントを追加する

Remove the four screws from the metal plate as shown using a #00 Philips screwdriver.
  • Remove the four screws from the metal plate as shown using a #00 Philips screwdriver.

    • The four half inch bronze screws are indicated by the yellow marking circles.

コメントを追加する

Carefully remove the metal cover from the connector by sliding the cover up and out. Carefully remove the metal cover from the connector by sliding the cover up and out.
  • Carefully remove the metal cover from the connector by sliding the cover up and out.

コメントを追加する

Remove the connector from the housing. Remove the connector from the housing.
  • Remove the connector from the housing.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Ryan Kotzebue

メンバー登録日: 2010年10月07日

243 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 5-14, Maness Fall 2010 Cal Poly, Team 5-14, Maness Fall 2010人のメンバー

CPSU-MANESS-F10S5G14

5 メンバー

6のガイドは作成済み

コメント1件

So, I'm assuming you are doing this to correct a connection problem between the Sega CD and Genesis. Now that it's disassembled are you slightly bending the connections for a better fit, or cleaning the connectors to remove over 20 years of tarnish build up, or replacing all together with a new manufactured unit? By the way, I have my Sega CD and Genesis still to this day. They are in their original box with all the manuals and other pamphlets that they came with. I should see if Sherlock Holmes is still boring as it was when I first played it back in '91. Better yet play Night Trap and think about how controversial this game was at the time and even was pulled from store shelves, because of the controversy surrounding the girls outfits worn in the game.

helliant1 - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 17

今までの合計 4,410