メインコンテンツにスキップ

Sears Craftsman 315.109020 Motor Replacement

必要な工具と部品

  1. Sears Craftsman 315.109020 Motor Replacement, Motor: 手順 1、 2の画像 1 Sears Craftsman 315.109020 Motor Replacement, Motor: 手順 1、 2の画像 2
    • To ensure that you do not get grease and dirt on your table or floor, lay a towel down before you begin working.

    • The grease from the circular saw can stain your towel so a dirty towel or work rag is recommended.

  2. Sears Craftsman 315.109020 Motor Replacement: 手順 2、 3の画像 1 Sears Craftsman 315.109020 Motor Replacement: 手順 2、 3の画像 2 Sears Craftsman 315.109020 Motor Replacement: 手順 2、 3の画像 3
    • With your Phillips screwdriver, unscrew all 7 of the 20 mm screws on the handle of the circular saw.

    • There is one 25 mm screw that goes in the hole circled in red.

    • Unscrew the forked screw head

    • Lift off the top half of the handle.

  3. Sears Craftsman 315.109020 Motor Replacement: 手順 3、 2の画像 1 Sears Craftsman 315.109020 Motor Replacement: 手順 3、 2の画像 2
    • Unscrew the two wide-head 20 mm screws holding the remaining half of the handle to the motor.

    • Remove the remaining half of the handle from the motor by lifting it over the screw that is keeping it in place.

  4. Sears Craftsman 315.109020 Motor Replacement: 手順 4、 3の画像 1 Sears Craftsman 315.109020 Motor Replacement: 手順 4、 3の画像 2 Sears Craftsman 315.109020 Motor Replacement: 手順 4、 3の画像 3
    • Using a crescent wrench, unscrew the hex washer head screw that is holding the blade in place.

    • Lift the blade over the internally threaded screw and pull it off of the saw.

    • If the hex washer head screw rotates but does not loosen or if the whole blade rotates as you turn your wrench, giving the wrench a quick jerk should loosen the screw.

  5. Sears Craftsman 315.109020 Motor Replacement: 手順 5、 2の画像 1 Sears Craftsman 315.109020 Motor Replacement: 手順 5、 2の画像 2
    • Remove the blade cover by applying upward pressure until it unsnaps from the washer.

    • The blade cover will come off easier if it is facing away from the rest of the saw (see second picture).

  6. Sears Craftsman 315.109020 Motor Replacement: 手順 6、 2の画像 1 Sears Craftsman 315.109020 Motor Replacement: 手順 6、 2の画像 2
    • Unscrew the 70 mm screw that is inside the black tube (see first picture).

    • Unscrew the five screws as highlighted in the second picture. The bottom left is a 70 mm screw and the other four are 20 mm screws.

    • Unscrewing the remaining four 20 mm screws are unnecessary unless you wish to repair or replace the cogs in the saw.

  7. Sears Craftsman 315.109020 Motor Replacement: 手順 7、 2の画像 1 Sears Craftsman 315.109020 Motor Replacement: 手順 7、 2の画像 2
    • The motor will now be loose and you should be able to twist the motor in a counter-clockwise direction until it is able to be pulled off.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

1人の作成者と共同作成されました。

Blake Avant

メンバー登録日: 09/29/15

218 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 17-4, Green Fall 2015 Cal Poly, Team 17-4, Green Fall 2015人のメンバー

CPSU-GREEN-F15S17G4

3 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 8

今までの合計 372