メインコンテンツにスキップ

はじめに

This guide does not require any prerequisite steps. Flip open the phone and begin the guide.

パーツ

パーツは指定されていません。

  1. With the flat end of  a spudger, remove the plastic covers located on the corners of the display near the hinge and above the screen, revealing four screws underneath. With the flat end of  a spudger, remove the plastic covers located on the corners of the display near the hinge and above the screen, revealing four screws underneath.
    • With the flat end of a spudger, remove the plastic covers located on the corners of the display near the hinge and above the screen, revealing four screws underneath.

  2. Apple Watch キット

    スクリーンとバッテリー の修理が簡単にできます。

    ショップを見る

    Apple Watch キット

    スクリーンとバッテリー の修理が簡単にできます。

    ショップを見る
  3. Remove the 4.4mm screw in each corner using the Tri-wing Y0 screwdriver. Remove the 4.4mm screw in each corner using the Tri-wing Y0 screwdriver.
    • Remove the 4.4mm screw in each corner using the Tri-wing Y0 screwdriver.

  4. Carefully pry the screen protector off the phone using the flat end of the spudger. This will require a bit of force as the back of the screen protector is lined with an adhesive material.
    • Carefully pry the screen protector off the phone using the flat end of the spudger.

    • This will require a bit of force as the back of the screen protector is lined with an adhesive material.

    • Once free from the adhesive, pull the screen protector away from the phone.

まとめ

To reassemble your device, follow these instructions in reverse order.

StephenYH

メンバー登録日: 2013年03月11日

20 ポイント

3のガイドは作成済み

チーム

Clemson, Team 12-1, Benson Spring 2013 Clemson, Team 12-1, Benson Spring 2013人のメンバー

CLEM-BENSON-S13S12G1

4 メンバー

20のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 209