1. Before disassembling the device, make sure it is powered off.
    • Before disassembling the device, make sure it is powered off.

    • Remove the four 1.5mm screws on the back of the device.

  2. Using a plastic opening tool, lift the metal backing from the front of the device.
    • Using a plastic opening tool, lift the metal backing from the front of the device.

  3. Pull the rear panel off of the Sansa e260R.
    • Pull the rear panel off of the Sansa e260R.

  4. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  5. Grip the bottom of the battery with your thumb and forefinger and pull it away from the device.
    • Grip the bottom of the battery with your thumb and forefinger and pull it away from the device.

  6. Remove the four 1.5mm screws on the inner casing of the device.
    • Remove the four 1.5mm screws on the inner casing of the device.

    • These screws are very small and hard to extract from the casing. It may be helpful to use a magnetic screwdriver.

  7. Flip the device so that the front is facing you.
    • Flip the device so that the front is facing you.

    • Slide a plastic opening tool between the plastic front cover and the metal back cover of the device.

  8. Pull the front cover away from the rest of the device. Pull the front cover away from the rest of the device.
    • Pull the front cover away from the rest of the device.

まとめ

To reassemble your device, follow these instructions in reverse order.

Casey Smith

メンバー登録日: 2012年01月20日

99 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 8-15, Maness Winter 2012 Cal Poly, Team 8-15, Maness Winter 2012人のメンバー

CPSU-MANESS-W12S8G15

5 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,738