メインコンテンツにスキップ

Sanitaire SC684 Roller Brusher and Drive Belt Replacement

  1. Sanitaire SC684 Roller Brusher and Drive Belt Replacement, Roller Brush and Belt: 手順 1、 1の画像 1
    • Be sure to unplug the vacuum cleaner before disassembling to prevent electric shock.

    • Lay the vacuum on its back.

  2. Sanitaire SC684 Roller Brusher and Drive Belt Replacement: 手順 2、 1の画像 1
    • Find the metal plate (located directly in the center).

    • Locate the two latches on either side of the metal plate.

    • Detach the latches by pulling them away from metal plate.

  3. Sanitaire SC684 Roller Brusher and Drive Belt Replacement: 手順 3、 1の画像 1
    • Remove the metal plate by pulling it towards you.

  4. Sanitaire SC684 Roller Brusher and Drive Belt Replacement: 手順 4、 1の画像 1
    • Identify the belt and brush roller.

    • The belt is a black ring made of rubber.

    • The brush roller is the long metal tube with bristles attached to it.

  5. Sanitaire SC684 Roller Brusher and Drive Belt Replacement: 手順 5、 1の画像 1
    • Remove the belt from the circular knob by inserting your fingers on either side, gently lifting towards you.

  6. Sanitaire SC684 Roller Brusher and Drive Belt Replacement: 手順 6、 2の画像 1 Sanitaire SC684 Roller Brusher and Drive Belt Replacement: 手順 6、 2の画像 2
    • Pull brush roller out and slip the belt off from the indent in the middle of the roller.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

10人の作成者と共同で作成されました。

Caycie Pascual

メンバー登録日: 09/26/12

1 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 16-58, Forte Fall 2012 Cal Poly, Team 16-58, Forte Fall 2012人のメンバー

CPSU-FORTE-F12S16G58

5 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 18

今までの合計 2,808