修理を始めるには コミュニティ ストア

Sandisk Sansa m230 Series mp3 player Microphone Replacement

はじめに

To replace a faulty microphone follow the steps in this guide. This may be your only option if you find yourself unable to make voice recordings anymore with your device.

必要な工具と部品

  1. Sandisk Sansa m230 Series mp3 player Microphone Replacement, Sandisk Sansa m230 Series mp3 player Teardown: 手順 1、 1の画像 1

    • Remove the battery compartment cover.

    • Remove the battery.

    編集

  2. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 2、 1の画像 1

    • Locate and remove the screw next to the battery compartment lid.

    編集

  3. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 3、 1の画像 1

    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

    編集

  4. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 4、 1の画像 1

    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

    編集

  5. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 5、 1の画像 1

    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

    編集

  7. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 6、 1の画像 1

    • You now have access to all components found on the inside of the device!

    編集

  8. Sandisk Sansa m230 Series mp3 player Microphone Replacement, Microphone: 手順 7、 1の画像 1

    • Locate microphone on motherboard.

    編集

  9. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 8、 1の画像 1

    • Find where microphone is connected to motherboard via solder.

    編集

  10. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 9、 2の画像 1 Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 9、 2の画像 2

    • Use the soldering iron to liquefy the solder connecting the microphone to the motherboard.

    編集

  11. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 10、 1の画像 1

    • The solder and soldering iron will be very hot at this time. Do not touch unless wearing protective gloves as you will be burnt.

    • When not in use, be sure to always elevate the hot end of the soldering iron on a metal stand to prevent incidental burns.

    編集

  12. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 11、 2の画像 1 Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 11、 2の画像 2

    • Remove the faulty microphone as you heat and melt the soldering points.

    編集

  13. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 12、 1の画像 1

    • Replace the faulty microphone with a new one in working order.

    編集

  14. Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 13、 2の画像 1 Sandisk Sansa m230 Series mp3 player Microphone Replacement: 手順 13、 2の画像 2

    • With the new microphone in place, use the soldering iron and solder to create a stable connection between the motherboard and microphone.

    • Give the new solder time to cool and harden.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

James Thorne

メンバー登録日: 11/05/13

638 ポイント

6のガイドは作成済み

バッジ: 7

+4 個以上のバッジ

チーム

UMass Dartmouth, Team 1-8, Shastany Fall 2013 UMass Dartmouth, Team 1-8, Shastany Fall 2013人のメンバー

UMASSD-SHASTANY-F13S1G8

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 473